User Tools

Site Tools


setup:lite

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
setup:lite [2017/04/29 08:12]
seytonic created
setup:lite [2017/04/29 09:49]
seytonic
Line 1: Line 1:
-a+====== Lite Setup ====== 
 +===== Installing the things ===== 
 + 
 +Whether you're trying to set up either the Elite or Lite you'll need the [[https://​www.arduino.cc/​en/​Main/​Software|Arduino IDE]] installed and up to date. 
 + 
 +===== Uploading ​script ===== 
 + 
 +Go to the [[https://​malduino.com/​converter/​|script converter]] in the sidebar, in the empty text box on the left type up your script. As an example we'll type... 
 + 
 +<​code>​ 
 +DELAY 1000 
 +STRING hello world 
 +</​code>​ 
 + 
 +This tells malduino to wait 1000 milliseconds (a second), then type 'hello world'​. Click convert, then select the keyboard layout (keyboard'​s language of the computer you'll be executing on) and hit download. 
 + 
 +{{ :​setup:​screenshot_21.png?​nolink&​600 |}} 
 + 
 +Unzip the zip file and open the '​lite'​ folder, open the lite.ino file, this should open in the Arduino IDE. 
 + 
 +Next in the menu bar select Tools > Board > Arduino/​Genuino Micro 
 + 
 +Then select Tools > Port > (Arduino/​Genuino Micro) 
 + 
 +Finally go to Sketch > Upload 
 + 
 +Once the sketch has uploaded you can remove the lite and toggle it's switch, putting it into the '​on'​ position, then just stick it in a computer and it'll run. To put the lite back into programming mode simply toggle the switch into the '​off'​ position and put it back into your computer for programming.
setup/lite.txt · Last modified: 2017/04/29 09:49 by seytonic